3D Histech Pannoramic MIDI - Page 74

Pannoramic MIDI 1.18 User’s Guide 4 Software Description
To insert and remove slides
• To move a slide to the loading position, click the number of the slide that you want to load
.
• To load a slide from the tray to the specimen holder, click . A preview image is
automatically generated.
• To unload the slide, click .
• To remove the tray, click . It will then be moved to the position where you can
remove it manually.
• To access the Scan Options window, click .
Note:
These settings are only applicable if you do not use profiles. If you use
profiles, the profile settings are used.
Scanning Mode
• Full automatic: focus and exposure time are automatically determined by the software
• User controlled: you can define focus and exposure time manually.
The selection of scanning mode influences the number of options on the Focus panel.
To administer profiles, use the Scan Profiles field.
• The current profile name is displayed at the bottom left corner of the screen.
• To save the current profile, click Save.
• To select an existing profile from the selection menu, click Load.
• You can delete the current profile by clicking Delete.
April 3, 2014 - Rev 1 3DHISTECH Ltd. 74(127)