ZPrinter
®
350 / ZPrinter
®
450 User Manual ZPrinter 350 and ZPrinter 450 Overview
3dscentral.3dsystems.com 16 All Rights Reserved
10/31/12
1.7 LCD Menu Overview - ZPrinter 350
1.8 LCD Menu Overview - ZPrinter 450
1.9 Where To Go For More Information
Quick Start Guide A Quick Start Guide is shipped with your printer Accessories Kit and will quickly get
you printing parts. It has pictures and simple, step-by-step instructions to guide you through a print job. If
you need an additional copy of the Quick Start Guide, an electronic copy is included on the ZPrint Installa-
tion CD. Or, visit our Web site at 3dscentral.3dsystems.com.
Software User Manuals User Manuals for the ZPrint and ZEdit Software programs are supplied on the
Installation CD with the software. Additional copies are available on our Web site at
3dscentral.3dsystems.com.
Both programs include a searchable Help system and links to additional information on our User Web site
regarding 3D applications and printing/post-processing techniques.
Post-Processing Learn more about the different post-processing products that are available to use with
your printer, on the Materials section of our User Web site at 3dscentral.3dsystems.com.
Consumables To order consumables/materials, visit 3DS Shop at 3dscentral.3dsystems.com.
If you are an international customer, you can order consumables directly from your local Service Provider
or reseller.
Main Menu
VACUUM & DEPOWDER
PREP BUILD CHAMBER
STATUS REPORT
PRINTHEAD >
BUILD CHAMBER >
GO ONLINE
Printhead Submenu
MAIN MENU >
CHANGE PRINTHEAD
FILL BED & PRINT BLOCK
PRINT BLOCK ONLY
PURGE PRINTHEAD
Build Chamber Submenu
MAIN MENU >
RAISE PLATFORM
LOWER PLATFORM
SPREAD LAYER
FILL BED
CONTROL ROLLER
Main Menu
VACUUM & DEPOWDER
PREP BUILD CHAMBER
STATUS REPORT
PRINTHEADS >
BUILD CHAMBER >
GO ONLINE
Printhead Submenu
MAIN MENU >
CHANGE PRINTHEADS
FILL BED & PRINT BLOCK
PRINT BLOCK ONLY
PURGE HP11 PRINTHEAD
Build Chamber Submenu
MAIN MENU >
RAISE PLATFORM
LOWER PLATFORM
SPREAD LAYER
FILL BED
CONTROL ROLLER
To Next Page
Loading...