ZPrinter
®
350 / ZPrinter
®
450 User Manual ZPrinter 350 and ZPrinter 450 Overview
3dscentral.3dsystems.com 3 All Rights Reserved
10/31/12
1.3 Computer/System Requirements
Computer operating systems and hardware change frequently. Please check out the latest recommenda-
tions on our 3DS Central Web site, in the Support section, under your model printer:
3dscentral.3dsystems.com.
Power Requirements Type 1 - 350:
100V~, 7 Amp, 50 Hz.
115V~, 7 Amp, 60 Hz.
230V~, 4 Amp, 50 Hz.
Type 1 and Type 2 - 450:
100V~, 15 Amp, 50 Hz.
115V~, 15 Amp, 60 Hz.
230V~, 7 Amp, 50 Hz.
Type 3 - 350 and 450:
100 - 120V~, 7 A, 50 - 60 Hz
230V~, 4 A, 50 - 60 Hz
Fuse: 6.3A 250V Time Delay
Materials -
High Performance Composite
zp
®
150 Powder with zb
®
63 Binder
3D Systems is always evaluating new materials for use
with your printer. For the latest information check the
Materials section of our Web site:
3dscentral.3dsystems.com.
Print Head HP11 (clear)
HP57 (color) (ZPrinter 450 only)
Liquid Waste System Disposable waste tray
To Next Page
Loading...