ZPrinter
®
350 / ZPrinter
®
450 User Manual Troubleshooting the ZPrinter 350/450
3dscentral.3dsystems.com 65 All Rights Reserved
10/31/12
7.5 Motion Errors/Slow Axis
There are a number of Error Codes the printer may report that all relate to the Slow Axis, and that all
share a common set of solutions.
Error Codes covered in this section:
• Error 2301:0 Motors Not Rezeroed
• Error 2303:0 x Axis Pos Error
• Error 2305:0 x Axis Settle Error
• Error 2400:0 x Axis Seek Error
• Error 3011 System Error
• Error 3013 Sequencer Timeout
• Error 43000 Sequencer Timeout
For more detailed information on what these errors mean, see Section 7.11, ’Error Codes and Messages
Background Details’.
How to do it
To perform the cleaning and lubrication called for in the flowchart, see:
• Section 6.4, ’Slow Axis Bearing Lubrication’
To Next Page
Loading...
Need help?
General