ZPrinter
®
350 / ZPrinter
®
450 User Manual Troubleshooting the ZPrinter 350/450
3dscentral.3dsystems.com 75 All Rights Reserved
10/31/12
7.13 Calling for Service
If you are still experiencing problems after troubleshooting, contact your local Reseller or Service Provider
with the below information.
• Serial Number
• Company Name and Contact Info
• Log File (obtainable through the ZPrint Software Service Menu)
• .INI File (Obtainable through the ZPrint Software Service Menu)
• SPREAD.CSV File(Z650, Z350/Z450 and Z150/Z250) (Obtainable through the ZPrint Software
Service Menu, Receive File option)
• Head Report Information (Obtainable through the ZPrint Software Service Menu)
• Binder/Powder Types
• Binder/Powder Expiration Dates
• EXACT Error Code/ Description of Problem
Also look at the back of the printer, near where the
power cord attaches. If you have a ZPrinter 350/450 Type 3,
there will be 4 diagnostic LEDs. Record the pattern of which LEDs
are illuminated and which are not, and report this to Service.
7.14 Contact 3D Systems
If you have any questions about your 3D Printer or the ZPrint/ZEdit Software, please contact your local
Reseller/Service Provider. If they are unable to help, contact us directly.
United States
Corporate Headquarters:
333 Three D Systems Circle
Rock Hill, SC 29730
Tel: +1.803.326.3900
Technical Support - Europe/Middle East/
Africa
Phone: +44 20 8144 3907
E-mail: support-emea@3dsystems.com
Skype: z.corp.service.emea
Technical Support – North and South
America
Phone: +1 781 852 5050
Fax: +1 781 852 5055
E-mail: support-us@3dsystems.com
Technical Support – Asia Pacific
Phone: +852 8191 2453
Fax: +852 2948 2244
E-mail: support-apac@3dsystems.com
To Next Page
Loading...