ZPrinter
®
350 / ZPrinter
®
450 User Manual
3dscentral.3dsystems.com v All Rights Reserved
10/31/12
7.3.1 Try This First..................................................................................... 61
7.3.2 Troubleshoot Print Head/Weak Parts ............................................... 62
7.4 Motion Errors/Fast Axis ............................................................................ 63
7.4.1 Troubleshoot Fast Axis..................................................................... 64
7.5 Motion Errors/Slow Axis............................................................................ 65
7.5.1 Troubleshoot Slow Axis .................................................................... 66
7.6 Network Errors/Cannot Connect to Printer ............................................... 67
7.7 Network Errors/Packet Timeout................................................................ 68
7.8 Part Quality Issues Streaky/Striped Parts, Delamination, Weak Parts..... 69
7.9 Part Quality Issues Bad Surface Finish .................................................... 70
7.9.1 Bad Horizontal Surface Finish .......................................................... 70
7.9.2 Bad Vertical Surface Finish .............................................................. 70
7.10 Miscellaneous Problems......................................................................... 71
7.10.1 Vacuum Has Low/No Suction......................................................... 71
7.10.2 Binder Cartridge is Full But ZPrint Indicates Empty........................ 72
7.11 Error Codes and Messages Background Details.................................... 73
7.12 Additional Information............................................................................. 74
7.12.1 Materials ......................................................................................... 74
7.12.2 Service............................................................................................ 74
7.13 Calling for Service................................................................................... 75
7.14 Contact 3D Systems............................................................................... 75
To Next Page
Loading...