EasyManua.ls Logo

4IPNET EAP210 - Status Monitoring

4IPNET EAP210
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
123
Table 3 Status Page's Organizational Layout
Item
Description
System
System Name
The system name of the Access Point.
Firmware Version
The current firmware version of the Access
Point.
Build Number
The current firmware build number of the
Access Point.
Location
The location of the Access Point.
Site
The site of the Access Point.
Device Time
The system time of the Access Point.
System Up Time
The time that the system has been in
operation.
CPU/RAM Usage
Displays the current CPU/RAM utilization.
LAN Interface
MAC Address
The MAC address of the LAN Interface.
IP Address
The IP address of the LAN Interface.
Subnet Mask
The Subnet Mask of the LAN Interface.
Gateway
The Gateway of the LAN Interface.
Radio Status
MAC Address
The MAC address of the RF Card.
Band
The RF band in use.
Channel
The channel specified.
Tx Power
Transmit Power level of RF card.
AP Status
Profile Name
The profile name of AP.
BSSID
Basic Service Set ID.
ESSID
Extended Service Set ID.
Security Type
Security type of the Virtual AP.
Online Clients
The number of online clients.
Tunnel
The status of the used Tunnel.
IPv6
Status
Enabled/ Disabled.
CAPWAP
Status
Enabled/ Disabled.

Other manuals for 4IPNET EAP210

Related product manuals