User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
7. Web Management Interface Configuration
This chapter will guide the user through the AP’s detailed settings. The following table shows all the User
Interface (UI) functions of 4ipnet’s Enterprise Access Points. The Web Management Interface (WMI) is
the page where the status is displayed, control is issued and parameters are configured. In the Web
Management Interface; there are two main interface areas: Main Menu and Working Area. The
Working Area occupies the major area of the WMI, displayed in the center of the interface. It is also
referred to as the configuration page. The Main Menu, on the top of the WMI, allows the administrator to
traverse to various management functions of the system. The management functions are grouped into
branches: System, Wireless, Firewall, Utilities, and Status.
Table 1 4ipnet Access Points’ Function Organization
To Next Page
Loading...
