User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
7.3.2 Service
The administrator can add or delete firewall services here; the services in this list will become options to
choose in firewall rule (when EtherType is IPv4).
The Access Point provides a list of rules to block or pass traffic of layer-3 or above protocols. These services
are available to choose from a drop-down list of layer2 firewall rule edit page with Ether Type IPv4. The first
28 entries are default services and the administrator can add/delete any extra desired services.
There are 28 firewall services available in default settings; these default services cannot be deleted but can
be disabled. If changes are made, please click SAVE to save the settings before leaving this page.
Firewall Service Page
To Next Page
Loading...
