4IPNET EAP210 - Capwap

User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
84
7.1.5 CAPWAP
CAPWAP is a standard interoperable protocol that enables a controller to manage a collection of wireless
access points. There are 5 methods of auto AP discovery, namely DNS SRV, DHCP option, Broadcast,
Multicast, and Static. Please refer to the Web page at System > CAPWAP.
 CAPWAP: The CAPWAP feature can be turned on by selecting “Enable” or turned off by selecting
“Disable”
 Certificate Date Check: To enable this item, select Enable and click Manage Certificates to enter the
Upload Certificate page. Please refer to the section 7.4.4. Upload Certificate.
 DNS SRV Discovery: Using DNS SRV to discover acess controller.
 Domain Name Suffix: Enter the suffix of the access controller, such as example.com.
 DHCP Option Discovery: Using DHCP option to discover access controller.
 Broadcast Discovery: Using Broadcast to discover access controller.
 Multicast Discovery: Using muticast to discover access controller.
 Static Discovery: Using Static approach to discover access controller.
 AC Address: The IP address of the access controller. If it can not discover the first AC, it will try to
discover the second AC.