4IPNET EAP210 - Management

User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
138
8.1.4 Management
The system supports SNMP, Syslog, and UPnP functions for easy management. These functions can be
configured on this page.
 SNMP Configuration: By enabling SNMP function, the administrator can obtain the system
information remotely.
 Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
 Community String: The community string is required when accessing the Management Information
Base (MIB) of the system.
o Read: Enter the community string for accessing the MIB with Read privilege.
o Write: Enter the community string for accessing the MIB with Write privilege.
 SNMPv3 User List: The system allows 5 SNMP Users with Read or Read & Write Access. Determine
the Name and Authentication Password on the SNMP Account List.
 Trap: When enabled, events on Cold Start, Interface UP & Down, and Association & Disassociation
can be reported to an assigned server.
o Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
o Server IP Address: Enter the IP address of the assigned server for receiving the trap report.