4IPNET EAP210 - Page 140

User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
139
 Remote Syslog: By enabling this function, specify a remote Syslog server to accept system log
messages from the system remotely.
 Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
 Server IP: The IP address of the Syslog server for receiving the reported events.
 Server Port: The port number of the Syslog server.
 Syslog Level: Select the desired level of received events from the drop-down list box.
 Management IP List: In the page of "Management IP Address List", the administrator can grant the
access of the web management interface by specifying a list specific IP addresses or ranges of IP
addresses, no matter the access is from WAN or LAN.
 UPnP Configuration: This option can be enabled if UPnP service is required by LAN device.
 Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.