User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
7.2.3 VAP Configuration
This section provides configuration of each Virtual Access Point with settings such as Profile Name,
ESSID, and VLAN ID.
VAP Configuration Page
To enable specific VAP, select the VAP from the drop-down list of Profile Name. The basic settings of
each VAP are collected in the profile as follows:
VAP: Enable or Disable this VAP.
Profile Name: The profile name of a specific RF card and its VAP for identity / management
purposes.
ESSID: ESSID (Extended Service Set ID) serves as an identifier for clients to associate with the
specific VAP. It can be coupled with different service levels like a variety of wireless security types.
VLAN ID: The 4ipnet Access Point supports tagged VLANs (virtual LANs). To enable VLAN function,
each VAP shall be given a unique VLAN ID with valid values ranging from 1 to 4094. Once VLAN is
Enabled, QoS is supported on the VAP.
To Next Page
Loading...
