4IPNET EAP210 - Page 134

User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
133
 Description: Further information of the system.
 Location: Information about the geographical location of the system, which can help the administrator
locate it easily.
 Time
Time settings allow the system time synchronized with NTP server or manually set.
 Device Time: Display the current time of the system.
 Time Zone: Select an appropriate time zone from the drop-down list box.
 Synchronization: Synchronize the system time either by NTP server or manual setup.
(1) Enabled NTP:
By selecting Enabled NTP, the Access Point synchronizes its system time with the NTP server
automatically. While this method is chosen, at least one NTP server's IP address or domain
name must be provided. If FQDN (Full Qualified Domain Name) is used as the IP address of
NTP server, the DNS server must also be activated (please refer to 8.1.3 Network Settings).
(2) Manually set up:
By selecting Manually set up, the administrator can manually set the system date and time.
▬ Set Date: Select the appropriate Year, Month, and Day from the drop-down list box.
▬ Set Time: Select the appropriate Hour, Min, and Sec from the drop-down list box.