4IPNET EAP210 - Page 137

User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
136
 WAN Configuration: Determine the way to obtain the IP address, by static or DHCP.
 Mode: Determine the way to obtain the IP address, by DHCP or Static.
o Static: The administrator can manually set up the static WAN IP address.
▬ IP Address: The IP address of the WAN port.
▬ Netmask: The subnet mask of the WAN port.
▬ Gateway: The gateway IP address of the WAN port.
▬ Primary DNS Server: The IP address of the primary DNS (Domain Name System) server.
▬ Secondary DNS Server: The IP address of the substitute DNS server.
o DHCP: This connection type is applicable when the system is connected to a network with the
presence of a DHCP server; all related IP information required will be provided by the DHCP
server automatically.
 Bandwidth Limit:
o Download: The maximum download bandwidth of WAN interface to be shared by clients.
o Upload: The maximum upload bandwidth of the WAN interface to be shared by clients.
 Dynamic DNS: The option can be enabled to bind FQDN-compliant Host Name with this device. If
enabled, the service Provider must be chosen from the drop-down list with provided Host Name, User
Name, User Email and Password.
 DDNS: Select Enable to activate this function or Disable to inactivate it.
 Provider: The name of the DDNS provider that the system is registered with. Select a DDNS provider
from the drop-down list box.
 Host Name: The FQDN registered with the selected DDNS provider.
 User name/ E-mail: The account ID, user name or e-mail, registered with the DDNS provider.
 Password/ Key: The password of the account registered with the DDNS provider.
 LAN Configuration: Configure LAN and DHCP settings on this page. IP Address and Netmask are
required fields to set up LAN interface.
 IP Address: The IP address of the LAN port.
 Netmask: The Subnet mask of the LAN port.
 DHCP Server: If enabled, devices connected to this system can obtain an IP address automatically.
o Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
o Start IP / End IP: Specify the range of IP addresses to be distributed by the DHCP server to
clients.
o Preferred DNS Server: Enter the IP address of a preferred DNS server; this field is required.
o Alternate DNS Server: Enter the IP address of a secondary DNS server; this is optional.
o WINS Server IP: Enter the IP address of a WINS (Windows Internet Name Service) server; this is
optional.
o Domain Name: Enter the domain name for this network.