User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
To reset the system to factory default through the console interface, Login as “reset2def” and enter
“reset2def” as your password.
If the console connection is not readily available, the IP address of the AP can be retrieved with an IP
Discovery Utility provided by 4ipnet. Simply connect via an Ethernet cable and run the Discovery
Utility. Note that the laptop/PC connecting to the AP must run in Windows XP compatible mode and a
static IP must be set.
P/N: V11020151103
To Previous Page
Loading...
