User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
VAP Configuration Page (VAP-1 shown)
Please select the desired RF card and VAP profile from the drop-down menu of Profile Name. Choose
Enable for the VAP field. Pick a descriptive Profile Name and an appropriate ESSID for clients to
associate to. A VLAN ID can be provided to indicate the traffic through this particular VAP. It may
allow further management/control (e.g. access rights and Internet usage, etc) of each VAP with a
management gateway. Click SAVE and then Reboot for the changes to take effect.
To Next Page
Loading...
