User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
WEP Key Index: Select a key index from 1 through 4. The WEP key index is a number that
specifies which WEP key is used for the encryption of wireless frames during data transmission.
WEP Keys: Provide the pre-defined WEP key value; the system supports up to 4 sets of WEP
keys.
802.1X: When 802.1X Authentication is selected, RADIUS authentication and enhanced dynamic WEP
are provided.
Security Settings: 802.1X Authentication
Dynamic WEP Settings:
o Dynamic WEP: For 802.1X security type, Dynamic WEP is always enabled to automatically
generate WEP keys for encryption.
o WEP Key Length: Select a key length from 64-bits or 128-bits.
o Re-keying Period: The time interval for the dynamic WEP key to be updated; the time unit is in
seconds.
RADIUS Server Settings (A redundant server can also be added to the system):
o Host: Enter the IP address or domain name of the RADIUS server.
o Authentication Port: The port number used by the RADIUS server. Specify a port number or
To Next Page
Loading...
