4IPNET EAP210 - Page 83

User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
82
 SNMP Configuration: By enabling the SNMP function, the administrator can obtain the system
information remotely.
SNMP Configuration Fields
 Enable/ Disable: Enable or Disable this function.
 Community String: The community string is required when accessing the Management Information
Base (MIB) of the system.
o Read: Enter the community string to access the MIB with Read privilege.
o Write: Enter the community string to access the MIB with Write privilege.
 SNMPv3 User List: The system allows 5 SNMP Users with Read or Read & Write Access. Determine
the Name and Authentication Password on the SNMP Account List.
 Trap: When enabled, events on Cold Start, Interface UP & Down, and Association & Disassociation
can be reported to an assigned server.
o Enable/ Disable: Enable or Disable this function.
o Server IP Address: Enter the IP address of the assigned server that will receive the trap report.