7th Sense Pixel Processing Juggler User Manual

140
M512-3 Juggler : User Guide © 2021 7thSense
Juggler Care and Maintenance
Cleaning
External casing and the front panel should be carefully wiped with a soft cloth and antistatic solution.
Air filter
A user-serviceable air filter is located behind each of two vents on the unit’s front panel. It is
important to remove and clean or replace the filters periodically to avoid overheating.
Spare filter pads for Juggler units can be provided by 7thSense. Juggler should not be run without
filters, since accumulations of dust inside the chassis can also cause overheating.
Replacing filters
Withdraw the Juggler from the rack far enough to access the retaining screws above the front panel.
There are two per filter allowing a small carrier to be lifted vertically out. The Juggler lid does not need
to be unscrewed or raised.

7th Sense Pixel Processing Juggler Specifications

General

Brand	7th Sense
Model	Pixel Processing Juggler
Category	Computer Hardware
Language	English