Need help?Do you have a question about the A10 Thunder Series and is the answer not in the manual?
General| Model | A10 Thunder Series |
|---|---|
| Category | Network Hardware |
| Application Delivery | Yes |
| Advanced Load Balancing | Yes |
| SSL Insight | Yes |
| DDoS Protection | Yes |
| IPv6 Migration | Yes |
| Hardware Acceleration | Yes |
| Humidity | 5% to 95% non-condensing |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Interfaces | 10/100/1000/10G/40G/100G Ethernet |
| Power Supply | Redundant Power Supplies Available |
Details the Ethernet data and management interfaces of the device.
Describes how the device automatically boots or can be manually booted.
Outlines the tasks for installing the rack-mount kit.
Details how to separate end brackets from inner rails.
Describes how to attach end brackets to the equipment rack.
Provides steps to slide the chassis into the installed rack rails.
Outlines the tasks for installing the sliding rail kit.
Explains how to attach front brackets to the device chassis.
Details how to attach inner rails to the device chassis.
Describes how to attach rail assemblies to the equipment rack.
Provides CLI examples for configuring port splitting.
To Next Page
