A&D BM-252 - Clock and Calendar Function

BM series 57
Store new dat
e
Store new tim
e
The current
time
New time
The current
date
New date
Press and hold
(approx. 2 seconds
)
Press several time
s
10.7. Clock and Calendar Function
The balance is equipped with a clock and calendar function. When
"GLP output (info)" and "Time/Date output (5-td)" are used, the time
and date can be added to the output data. The operation is as follows:
Operation
1 In the weighing mode, press and hold the RANGE key (for approx.
2 seconds) until ba5fnc is displayed, and then release the key.
2 Press the RANGE key several times to display Cl adj .
3 Press the PRINT key to enter the time and date setting mode.
Checking the current time
4 The current time is displayed with all the digits blinking.
To change the time, press the RE-ZERO key and proceed to Step 5.
When the time is correct, press the RANGE key and proceed to Step 6.
To exit the mode, press the CAL key and proceed to Step 8.
Storing a new time
5 Set the time in a 24-hour format using the following keys.
RE-ZERO (+)key
...
To increase the value by one.
MODE (-)key
.......
To decrease the value by one.
RANGE key
........
To select the digit to change the value.
PRINT key
.........
To store the new time, and proceed to Step 6.
CAL key
.............
To cancel the operation and proceed to Step 6.
Checking the current date
6 The current date is displayed with all the digits blinking.
To change the display order of year (y), month (m) and day (d),
press the MODE key. The date is output in the order as specified.
To change the date, press the RE-ZERO key and proceed to Step 7.
When the date is correct, press the CAL key and proceed to Step 8.
To change the time again, press the RANGE key and proceed
back to Step 4.
Storing a new date
7 Set the date using the following keys.
RE-ZERO (+)key
...
To increase the value by one.
MODE (-)key
........
To decrease the value by one.
RANGE key
........
To select the digits to change the value.
PRINT key
..........
To store the new setting, and proceed to Step 8.
CAL key
.............
To cancel the new setting and proceed to Step 8.
Quitting the operation
8 The balance displays the next menu item of the function table.
Press the CAL key to exit the mode and return to the weighing mode.
Note Do not enter invalid values such as non-existing time and date in this function.
When the clock backup battery has been depleted, the balance displays rtc pf .
Under this condition, press any key and set the time and date. The dead battery
only affects the clock and calendar function. Even so, the function works normally
as long as the AC adapter is connected to the balance.