BM series 79
15.4.2. pA55 2 (
Logging in by the administrator password is required before making changes
)
Logging in as an administrator (ADMIN)
1 In the standby mode, while holding down the CAL key, press
the ON:OFF key.
2 Enter a four-digit password using the following keys.
The display will turn off automatically after ten minutes of
non-operation.
MODE key............. To enter m
RANGE key........... To enter r
PRINT key............. To enter p
RE-ZERO key........ To enter 2
CAL key ................ To go back one character
3 When the password is correct, the balance
displays the login level, turns all the display
segments on, and then enters the weighing mode.
The default password set at the factory is 2222
(press the RE-ZERO key four times), for
administrator level.
When the password is incorrect, the balance
displays FA iL , sounds the buzzer three times
and turns the display off.
Logging in as a guest (GUE5t)
1 In the standby mode, press the ON:OFF key.
2 After , the balance enters the
weighing mode.
LoG
In : GUE
5T
While holding down
PA55 WD
PA55
----
ADMIN
RANGE
Enter four characters
No operation
for 10 minutes
FA iL
Correc
To Next Page
Loading...
