6/1553-DBC 444 01 Uen B4 2014-03-26 52
O
UTGOING CALLS
8.2.1.4 Canceling All Callbacks
To cancel all callbacks, do the following:
1) Select Cancel all Callbacks, and press Select.
The message “Callbacks are pending. Delete all?” is displayed.
2) Press Yes to confirm, or No to cancel.
Note: This procedure cancels all callbacks to extension numbers and
busy external lines.
8.2.1.5 Canceling a Single Callback
To cancel a single callback, do the following:
1) Lift the handset and wait for a dial tone.
2) Dial # 37 * extension number #.
3) Replace the handset.
Note: To cancel a single callback on an external line, enter the digit or
digits required for a line, rather than the extension number.
8.2.2 Call Waiting
If you urgently wish to contact a busy extension, you can send a notifi-
cation using a call waiting signal. Call Waiting is indicated either by a
tone (if the busy extension is an analog extension), or as a second call
(if the busy extension is a digital system phone or an IP phone).
Note: If the called extension does not accept call waiting, you will
continue to hear a busy tone. If the called extension ignores the
call waiting signal, you can order callback, see 8.2.1 Callback on
page 50.
8.2.2.1 Activating Call Waiting
To send a call waiting signal to a busy number, do the following:
1. Press CallWaiting.
2. Keep handset off hook. If the called party answers your call waiting
request, the call will be established. If the called party does not
want to answer your call, you will continue to hear the ring tone until
you go on hook.
To Next Page
Loading...
Need help?
General
