6/1553-DBC 444 01 Uen B4 2014-03-26 114
S
ETTINGS
To modify the option unit settings, do the following:
1. Press .
2. Select Option Unit, and press Select.
Note: Option Unit is available only when an option unit is
installed.
3. Select Busy signal, Extra bell, or Combined Bell/Busy, and
press Select.
18.8 Security and Access
It is possible to view and change the PIN code, if this option has been
configured by system administrator.
18.8.1 Changing PIN Code
You can change the PIN code used for logging on to the telephony
system. The PIN is the same as the individual authorization code, see
17.2 Authorization Code on page 98.
Note: Depending on the phone configuration, the menu option
Changing PIN may or may not be available.
To change the PIN code, do the following:
1. Press .
2. Select Security and Access, and press Select.
3. Select Change PIN and press Select.
4. Enter the new PIN and press OK.
18.9 Auto Answer
The Auto Answer option displays the current setting for the automatic
answer feature, which is described in detail in 7.4 Automatic Answer on
page 44.
Note: You can only view the current settings, not change them.
To view the automatic answer settings, do the following:
1. Press .
2. Scroll down to Auto Answer and press Select.
To Next Page
Loading...
