6/1553-DBC 444 01 Uen B4 2014-03-26 110
S
ETTINGS
3. Select Ring Signals and press Select.
Default Ring Signals is selected.
4. Press Select.
5. Navigate to the ring signal or melody you wish to use, and press
Select.
Note: If you wish to listen to a signal or melody before selecting
it, press Play. When you are done listening to a signal, press
Stop.
6. Press Yes to confirm.
7. Press to return to the idle state.
18.3.1.1 Downloading Melodies
Instead of standard ring signals, you can download up to 10 melodies to
your phone.
To download a melody from a specified server, do the following:
1. Press .
2. Select Sounds and press Select.
3. Select Ring Signals and press Select.
Default Ring Signals is selected.
4. Press Select.
5. Navigate to Melody 1 (empty) and press Add.
A list of all available melodies is displayed.
6. Select a melody and press Select.
Note: If you wish to listen to a signal or melody before selecting
it, press Play. When you are done listening to a signal, press
Stop.
18.3.2 Alert Signal
The alert signal specifies how the selected ring signal will sound. You
can set different alert signals for the first incoming call and the second
incoming call. The following alert signals are available:
Visual only The signal is muted, but the indicator on the line
key where the call is received is flashing.
To Next Page
Loading...
