6/1553-DBC 444 01 Uen B4 2014-03-26 78
C
ONTACTS
12.3.3 Changing Ring Signals For a Contact
To change ring signals for a certain contact, do the following:
1. Press and select the entry you wish to edit
2. Press Edit. A dialog box appears with the fields Number, Name and
Ring Signal.
3. Navigate to the Ring Signal field and press Change.
4. Navigate to the ring signal or melody you wish to use and press
Select.
Note: If you wish to listen to a signal or melody before selecting
it, press Play. When you are done listening to a signal, press
Stop.
12.4 Delete a Contact
It is possible to delete a selected contact, or all contacts at once.
12.4.1 Deleting One Contact
To delete a contact in the contact list, do the following:
1. Press and select the number you wish to delete.
2. Press more..., select Delete and press Select.
The message “[contact] Delete?” appears.
3. Press Yes to confirm or No to cancel.
12.4.2 Deleting All Contacts
To delete all contacts in the contact list, do the following:
1) Press and select more....
2) Select Delete all contacts and press Select.
The message “Delete all contacts?” is displayed.
3) Press Yes to confirm deletion. The message “Contacts empty!” is
displayed.
Press Exit or to return to the idle screen.
To Next Page
Loading...
Need help?
General
