6/1553-DBC 444 01 Uen B4 2014-03-26 76
C
ONTACTS
For instructions on how to change the ring signal, see 12.3.3
Changing Ring Signals For a Contact on page 78.
4. Press Done when you are done editing the contact fields. The new
contact is saved.
5. Press to return to the idle screen.
Note: The digits can be stored by adding the country code
number after a plus sign, for example +46 8 719 0000.
12.2.2 Adding a New Contact From the Call List
To add a new contact from the call list, do the following:
1. Press and press Add.
A dialog box appears with the fields Number, Name and Ring
Signal.
2. Press more..., select Add new from Call List and press Select.
3. Select a call list item and press Add again. The call list item
appears with name and number in the display.
4. To modify the ring signal, navigate to the Ring Signal field and
press Change.
For instructions on how to change the ring signal, see 12.3.3
Changing Ring Signals For a Contact on page 78.
5. Press Done when you are done editing the contact fields. The new
contact is saved.
6. Press to return to the idle screen.
Note: The digits can be stored by adding the country code
number after a plus sign, for example +46 8 719 0000.
12.3 Edit a Contact
This section describes how to edit the contact details in the contact list.
Note: It is possible to edit contacts via the web interface, see 19.1.1
Contacts Folder on page 118.
To Next Page
Loading...
