Fieldbus control 291
Note: After any changes to the communication settings, protocol must be reactivated
by either cycling the drive power, or by clearing and then restoring the station Id
(5302) or use Reinitialize Device Service.
5313 EFB PAR13 Not used for Comm setup. This parameter sets the
BACnet Device Object
Max Master Property.
5314 EFB PAR14 Not used for Comm setup.
5315 EFB PAR15 Not used for Comm setup.
5316 EFB PAR 16 Not used for Comm setup. This parameter indicates
the count of MS/TP tokens
passed to this drive.
5317 EFB PAR17 This parameter works with
parameter 5311 to set
BACnet Device Object
Instance IDs. See
parameter 5311.
Code Description EFB Protocol Reference
Modbus N2 FLN BACnet
To Next Page
Loading...
