364 Fault tracing
2034 OUTLET VERY
HIGH
0310 bit 1
Pressure at pump/fan
outlet too high
Check piping for blocks.
See parameter Group 44: Pump
protection.
2038 MOTOR HEATING
ACTIVE
2104 bit 1
Motor heating is
activated with
parameter 2104.
See parameter 2115 MOT. HEATING
SEL.
1)
Even when the relay output is configured to indicate alarm conditions (eg, parameter 1401 RELAY
OUTPUT 1 = 5 (ALARM) or 16 (FLT/ALARM)), this alarm is not indicated by a relay output.
CODE ALARM CAUSE WHAT TO DO
To Next Page
Loading...
