ABB ACS480 - Dimensions and Weights

occurring, select the next size MMP. (MS132-10 is the highest size in the MS132 frame size to meet Type E at 65 kA; the
next size up is MS165-16.)
4)
For all drives, the enclosure must be sized to accommodate the specific thermal considerations of the application as well
as provide free space for cooling. Refer to the technical data. For UL only: The minimum enclosure volume is specified in
the UL listing when applied with the ABB Type E MMP shown in the table. Fuses must be used for wall-mounted drives
installed with a UL Type 1 kit.
5)
Requires the use of the S1-M3-25 line side feeder terminal with the manual motor protector to meet Type E self-protection
class.
Dimensions and weights
Dimensions and weights (IP20 / UL type open)Frame
WeightM2M1DWH3H2H1
lbkginmminmminmminmminmminmminmm
3.61.77.521911.97508.22082.9736.71708.82238.1205R1
4.92.27.521912.95758.22083.9976.71708.82238.1205R2
5.62.57.521915.831488.22086.81726.71708.72208.1205R3
12.45.67.521919.212348.221310.32626.71709.52408.1205R4
Dimensions and weights (UL type 1 kit installed)Frame
Weight
1)
M2M1DWH3H2H1
lbkginmminmminmminmminmminmminmm
1.00.47.521911.97508.22082.9739.824711.62938.1205R1
1.10.57.521912.95758.22084.41119.824711.62938.1205R2
1.60.77.521915.831488.22087.418610.326113.03298.1205R3
2.71.37.521919.212348.421311.228412.331215.43918.1205R4
1)
Additional weight of the UL type 1 kit.
106 Technical data