ABB ACS480 - Free Space Requirements; Losses, Cooling Data and Noise

Symbols
H1 Height back
H2 Height back
H3 Height front
W Width of the base unit
D Depth
M1 Mounting hole distance 1
M2 Mounting hole distance 2
D
H2
H1
H3
W M1
M2
Ø 5 [.21]
Ø 10 [.21]
Ø 5 [.21]
Free space requirements
Free space requirementFrame
On the sides
1)
BelowAbove
inmminmminmm
00375250All
1)
If you plan to install a side-mounted option module to the drive, take the extra width needed on the right into account.
Losses, cooling data and noise
The air flow direction is from bottom to top.
The tables below specify the heat dissipation in the main circuit at nominal load and in the
control circuit with minimum load (I/O and panel not in use) and maximum load (all digital
inputs in the on state and the panel, fieldbus and fan in use). The total heat dissipation is
the sum of the heat dissipation in the main and control circuits.
Technical data 107