ABB ACS480 - Type Designation Key; Basic Code; Option (Plus) Codes

Type designation key
The type designation contains information on the specifications and configuration of the
drive.
Sample type code: ACS480-04-12A7-4+XXXX
￭ Basic code
DescriptionCode
Product seriesACS480
Construction. 04 = Module, IP20 (UL open type)
When there are no options selected: cabinet optimized module, IP20 (UL open type), ACS-AP-S
assistant control panel, I/O & EIA-485 module (RIIO-01), safe torque off, brake chopper, coated
boards, quick installation and start-up guide. For the IEC drive types also EMC cat. C2 filter.
04
Size. See the ratings table in the technical data.12A7
Input voltage. 4 = 3-phase 380…480 V AC4
￭ Option (plus) codes
DescriptionCode
Control panel and panel options
ACS-AP-S control panelJ400
ACS-BP-S basic control panelJ404
RDUM-01 blank cover with RJ45 connection, for remote mounting of the control panelJ424
ACS-AP-I industrial control panelJ425
ACS-AP-W control panel with BluetoothJ429
Without control panel0J400
I/O
BIO-01 I/O extension module (front option, can be used with fieldbus).L515
BAPO-01 external 24 V DC power extension module (side option).L534
BREL-01 relay output extension module.L511
RIIO-01 I/O & EIA-485 module (front option, as standard)L540
Base unit without RIIO-01 I/O & EIA-485 module0L540
Fieldbus adapters
FDNA-01 DeviceNetK451
FPBA-01 PROFIBUS DPK454
FCAN-01 CANopenK457
FSCA-01 Modbus/RTUK458
FECA-01 EtherCATK469
FEPL-02 Ethernet POWERLINKK470
FENA-21 2-port Ethernet (Ethernet/IP, Modbus/TCP, PROFINET)K475
FEIP-21 Ethernet/IPK490
FMBT-21 Modbus/TCPK491
FPNO-21 PROFINETK492
Documentation
Full set of printed manuals in the selected language. An English manual is included, if a translation is not
available.
32 Operation principle and hardware description