ABB ACS480 - Page 176

Def /
FbEq16/32
DescriptionName/ValueNo.
Relay 2 output status. 1 = selected to force / 0 = normalBit 0 RO2
Relay 3 output status. 1 = selected to force / 0 = normalBit 1 RO3
Relay 4 output status. 1 = selected to force / 0 = normalBit 2 RO4
Relay 5 output status. 1 = selected to force / 0 = normalBit 3 RO5
1=1Relay output forcing.RO forced data15.06
Relay 2 output status. 1 = open / 0 = closedBit 0 RO2
Relay 3 output status. 1 = open / 0 = closedBit 1 RO3
Relay 4 output status. 1 = open / 0 = closedBit 2 RO4
Relay 5 output status. 1 = open / 0 = closedBit 3 RO5
Relay output 2 source selection.RO2 source15.07
0Relay output 2 is open.
1Relay output 2 is closed
...For complete parameter list, refer to the drive firmware manual.
0.0 sSets the activation delay for relay output 2.RO2 ON delay15.08
10=1 sActivation delay for relay output 2.0.0...3000.0 s
0.0 sSets the deactivation delay for relay output 2.RO2 OFF delay15.09
10=1 sDeactivation delay for relay output 2.0.0...3000.0 s
Relay output 3 source selection.RO3 source15.10
0Relay output 3 is open.
1Relay output 3 is closed.
...For complete parameter list, refer to the drive firmware manual.
0.0 sSets the activation delay for relay output 3.RO3 ON delay15.11
10=1 sActivation delay for relay output 3.0.0...3000.0 s
0.0 sSets the deactivation delay for relay output 3.RO3 OFF delay15.12
10=1 sDeactivation delay for relay output 3.0.0...3000.0 s
Relay output 4 source selection.RO4 source15.13
0Relay output 4 is open.
1Relay output 4 is closed.
...For complete parameter list, refer to the drive firmware manual.
0.0 sSets the activation delay for relay output 4.RO4 ON delay15.14
10=1 sActivation delay for relay output 4.0.0...3000.0 s
0.0 sSets the deactivation delay for relay output 4.RO4 OFF delay15.15
10=1 sDeactivation delay for relay output 4.0.0...3000.0 s
Relay output 5 source selection.RO5 source15.16
0Relay output 5 is open.
1Relay output 5 is closed
...For complete parameter list, refer to the drive firmware manual.
0.0 sSets the activation delay for relay output 5.RO5 ON delay15.17
10=1 sActivation delay for relay output 5.0.0...3000.0 s
0.0 sSets the deactivation delay for relay output 5.RO5 OFF delay15.18
10=1 sDeactivation delay for relay output 5.0.0...3000.0 s
176 BREL-01 relay output extension module