74 Installation instructions
Checking the delivery
Check that all items listed in section Moving and unpacking the unit are present.
Check that there are no signs of damage. Before attempting installation and operation,
check the information on the type designation label of the drive to verify that the unit is of
the correct type.
Installing the motor cable at the motor end
Ground the motor cable shield 360 degrees at the lead-through of the motor terminal box.
Accessories box contents
1 Screw package
2 Feed through
3
Bracket for attaching the drive
module from top to Rittal cabinet
punched section. See page 77.
4 Support bracket for attaching the
drive module from top to a
mounting plate or wall. The
bracket brings a gap for cooling
air flow and prevents the drive
module screws from chafing the
plate. See page 77.
5 Cardboard box
To Next Page
Loading...
