Installation instructions 77
Attaching the drive module to a mounting plate or wall
Use the support bracket if you attach the drive module directly to a mounting plate or wall.
The support bracket prevents the drive module screws from chafing against the plate.
Alternatives for grounding the drive module
You can ground the drive module from its top back to the cabinet frame with these
alternatives:
1. from the grounding hole
2. t
o a Rittal punched section: with the fastening bracket.
1
2
Tapping screw M6×12 Torx T30 (Hex) 9 N·m
To Next Page
Loading...
