ABB ACS560 - Page 164

164 Parameters
49 Panel port communication Communication settings for the control panel port on the drive. 323
50 Fieldbus adapter (FBA) Fieldbus communication configuration. 326
51 FBA A settings Fieldbus adapter A configuration. 330
52 FBA A data in Selection of data to be transferred from drive to fieldbus controller
through fieldbus adapter A.
331
53 FBA A data out Selection of data to be transferred from fieldbus controller to drive
through fieldbus adapter A.
332
58 Embedded fieldbus Configuration of the embedded fieldbus (EFB) interface. 332
70 Override Enabling/disabling of override function, override activation signal
and override speed/frequency.
340
71 External PID1 Configuration of external PID. 342
76 PFC configuration PFC (Pump and fan control) and Autochange configuration
parameters. See also section Pump and Fan Control (PFC) macro
on page 125.
345
77 PFC maintenance and
monitoring
PFC (Pump and fan control) and Autochange configuration
parameters. See also section Pump and Fan Control (PFC) macro
on page 125.
351
95 HW configuration Various hardware-related settings. 352
96 System Language selection; access levels; macro selection; parameter
save and restore; control unit reboot; user parameter sets; unit
selection.
354
97 Motor control Switching frequency; slip gain; voltage reserve; flux braking; anti-
cogging (signal injection); IR compensation.
361
98 User motor parameters Motor values supplied by the user that are used in the motor
model.
364
99 Motor data Motor configuration settings. 365
Group Contents Page