ABB ACS560 - Frequency Reference Chain

240 Parameters
28
28 Frequency reference
chain
Settings for the frequency reference chain.
See the control chain diagrams on pages 486 and 487.
28.01 Frequency ref ramp
input
Displays the used frequency reference before ramping. See
the control chain diagram on page 486.
This parameter is read-only.
0.00
-500.00…500.00
Hz
Frequency reference before ramping. See par.
46.02
28.02 Frequency ref ramp
output
Displays the final frequency reference (after selection,
limitation and ramping). See the control chain diagram on
page 486.
This parameter is read-only.
0.00
-500.00…500.00
Hz
Final frequency reference. See par.
46.02
No. Name/Value Description Def/FbEq16