94 Program features
Load analyzer
Peak value logger
The user can select a signal to be monitored by a peak value logger. The logger
records the peak value of the signal along with the time the peak occurred, as well as
motor current, DC voltage and motor speed at the time of the peak. The peak value is
sampled at 2 ms intervals.
Settings
Parameter group 36 Load analyzer (page 291).
Diagnostics menu
The Diagnostics menu provides quick information about active faults, warnings, fault
history and I/O connection status. It also helps you to find out why the drive is not
starting, stopping or running at the desired.
• Active faults : Use this view to see the currently active faults. For information
on the fault codes, see list of Fault messages on page 424.
• Fault history : Use this view to see the fault history. For information on the fault
codes, see list of Fault messages on page 424.
• Active warnings : Use this view to see currently active warnings. For
information on the warning codes, see list of Warning messages on page 412.
• I/O status : Use this view to see currently active I/O settings.
Settings
Menu
Diagnostics
To Next Page
Loading...
