Value
20.40 Run permissive
70.02 Override enable
70.03 Override activation source
70.10 bit 0 Use run permissive
Selection
>
Selection
>
70.06 Override frequency
12.22 Analog scaled 2
40.01 PID Output act
Value
Value
0.0
22.80 Motor pot act
12.12 Analog scaled 1
Value
Value
Value
Selection
>
70.04 Override ref source
70.1 bit 2 Override direction is forward
70.1 bit 3 Override direction is reverse
Stop
AND
70.1 bit 0 Override Enabled
70.1 bit 1 Override Active
OR
Selection
>
70.1 bit 7 Run permissive
Value
20.44 Start interlock 4
70.10 bit 4 Use Start interlock 4
OR
Selection
>
70.1 bit 11 Start interlock 4
Value
20.43 Start interlock 3
70.10 bit 3 Use Start interlock 3
OR
Selection
>
70.1 bit 10 Start interlock 3
Value
20.42 Start interlock 2
70.10 bit 2 Use Start interlock 2
OR
Selection
>
70.1 bit 9 Start interlock 2
Value
20.41 Start interlock 1
70.10 bit 1 Use Start interlock 1
OR
Selection
>
70.1 bit 8 Start interlock 1
OVERRIDE
Constant speed defined by group 22
Constant frequency defined by group 28
99.04 Motor control mode
Value
70.07 Override speed
Value
0
70.05 Override direction
Selection
>
Override
reference
Compare
ABS -1
scalar
vector
scalar
vector
To Next Page
Loading...
