ABB ACS880-604

Materials
Module housing
• Zinc coated steel sheet
• Front plate covered with Lexan 8B35 polycarbonate film, color PMS 1C Cool
Gray and PMS Process Black (frames R6i…R8i)
Insulating materials and non-metallic items: mostly self-extinctiveFire safety of materials
(IEC 60332-1)
Package
• Plywood base, corrugated cardboard, PET straps.
• Product wrapping: polyethylene sheet or VCI protection bag
The main parts of the drive can be recycled to preserve natural resources and en-
ergy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious
metals can be recycled as material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery. Printed circuit boards and large electro-
lytic capacitors need selective treatment according to IEC 62635 guidelines. To aid
recycling, plastic parts are marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects
and recycling instructions for professional recyclers. End of life treatment must follow
international and local regulations.
Disposal
Standards
See ACS880 multidrive cabinets and modules electrical planning instructions
(3AUA0000102324 [English]).
Markings
See ACS880 multidrive cabinets and modules electrical planning instructions
(3AUA0000102324 [English]).
108 Technical data