ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
48 IM/CM/I–EN Rev. P
…Input/Output
Analog Outputs The analog outputs can be configured to retransmit any analog value and have a
configurable range from 0 to 24 mA.
Output 1 can also be configured to function as a digital output.
Analog Output 1 (4) Note. CM15: Analog Output 2 is available only if Option Board 1 is fitted –
see page 21.
CMF160: Analog Outputs 3 and 4 available only if optional Output / Slope
Relays Board is fitted (CM40/0235) – see page 22.
Output Type Selects the analog or digital output (applicable only to Analog Output 1).
Source Selects the parameter to be assigned to the output – see Appendix A.2, page 95 for
description of sources.
Elect. Low* The current output required when the source value is equal to the Eng Low value –
see page 46.
Elect. High* The current output required when the source value is equal to the Eng High value –
see page 46.
*Not applicable if
Output Type is Digital or Source is None.
To Next Page
Loading...
