ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
50 IM/CM/I–EN Rev. P
…Input/Output / …Digital I/O / …Digital IO 1 (6)
Polarity Sets the polarity of the output signal.
Positive For an output, the output is high if the source is active.
For an input, the input is active if a high signal is detected.
Negative For an output the output is high if the source is inactive.
For an input, the input is active if a low signal is detected.
Relays
Relay 1 (4 – CM15)
Relay 1 (6 – CMF160)
Source Selects the digital signal to be assigned to the relay – see Appendix A.1, page 94 for
description of sources.
Polarity Sets the polarity of the relay.
Positive The relay is energized If the source is active.
Negative The relay is energized If the source is inactive.
To Next Page
Loading...
