ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
52 IM/CM/I–EN Rev. P
…Process Alarm
Alarm 1 (8)
Type Alarm types comprise: High Process, Low Process, High Latch, Low Latch.
Tag The alarm Tag is displayed as a diagnostic message and appears in the Diagnostic Status Bar
and the Diagnostic view in the Operator Level.
Source The analog source –see Appendix A.2, page 95 for description of sources.
Trip The alarm trip level in engineering units – see page 99 for unit options.
High and Low Latch Alarm Action
Trip
Point
Alarm On
Alarm
Off
Hysteresis
Process
Variable
Alarm Latched
Alarm Acknowledged by Operator
Alarm Acknowledged by Operator
Alarm
Off
Trip
Point
Alarm On
Hysteresis
Alarm
Latched
Process Variable
High Latch Alarm Low Latch Alarm
To Next Page
Loading...
