ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
IM/CM/I–EN Rev. P 67
…Functions / …Math Blocks / …Block Type
Multiplexer Setup:
Source 1 Selects the source (any analog signal [see page 94] or user-defined constant) for the first input
into the multiplexer.
Source 1 Constant Sets the constant value to be used.
Note. Applicable only if Source 1 is assigned to one of the constants
Source 2 Select the source for the second input into the multiplexer.
Source 2 Constant Sets the constant value to be used.
Note. Applicable only if Source 1 is assigned to one of the Constants
Mux Selector Select the digital signal to be used to switch between the 2 multiplexer inputs.
'0' selects first input (Mux A Src); '1' selects second input (Mux B Src).
Square Root Setup:
Source 1 Selects the source of the parameter that requires square root to be applied – see Appendix A,
page 94 for description of sources.
To Next Page
Loading...
