ABB i-bus KNX AC/S 1.x.1 Series - Page 108

ABB i-bus
®
KNX
Parameters
108 2CDC508198D0211 Rev. A | AC/S 1.x.1
Application examples
• Delayed transmission of scene values.
• A motion sensor monitors corridor lighting. As soon as the sensor detects a movement, the lighting in
the corridor is gradually switched on (e.g. every 500 ms).
• Monitoring receipt of cyclical telegrams.
Bus voltage failure, download and restart
In the event of bus voltage failure, the timer stops and the input value is discarded. Therefore the output
sends no value on restart.
Other
Inputs not connected are treated as if they did not exist.