ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
226 2CDC508198D0211 Rev. A | AC/S 1.x.1
Object name
Object type
Unit
COV send
condition
Room: Split unit, status
Positive integer
value
No unit (95)
1.0
Outputs the status of the split unit.
The module has this BACnet output object if the Yes option is selected for the Split unit
parameter.
Signal value: 0 = Auto
1 = Heat
2 = Morning Warmup
3 = Cool
4 = Night Purge
5 = Precool
6 = Off
7 = Test
8 = Emergency Heat
9 = Fan only
0A = Free Cool
0B = Ice
0C = Maximum Heat Mode
0D = Economic Heat/Cool Mode
0E = Dehumidification
0F = Calibration Mode
10 = Emergency Cool Mode
11 = Emergency Steam Mode
14 = No Dem