ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 225
Object name
Object type
Unit
COV send
condition
Room: Cooling ceiling, dew point alarm sensor
Binary value
-
-
The module has this BACnet output object if the On/Off option or the 0…100 % option is selected for the Cooling ceiling
parameter and the Yes option is selected for the Cooling ceiling, dew point alarm sensor parameter.
Outputs the signal value from the dew point sensor in the cooling ceiling.
Signal value: -273...670760 °C
Room: Split unit, On/Off
Binary value
-
-
The module has this BACnet output object if the Yes option is selected for the Split unit parameter.
Outputs the operating status of the split unit.
Signal value: 0 = Off
1 = On
Room: Split unit, fan speed
Analog value
% (98)
1.0
Outputs the fan speed in the split unit.
The module has this BACnet output object if the Yes option is selected for the Split unit
parameter.
Signal value: 0…100 %

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English