ABB IRB 920 - Page 83

Protection covers
Protection covers for water and dust proofing
Protection covers are delivered together with the robot and must be well fitted to
the connectors in any application requiring water and dust proofing.
Always remember to refit the protection covers after removing them.
D
C
C
BA
xx2000001162
E
xx2100002442
Protection covers for air hose connector on the baseA
Protection covers for air hose connector on the process hubB
Protection covers for C2/SMB connector on the base and C1/C2 connector on
the process hub
C
Protection cover for C1 connector on the baseD
Continues on next page
Product manual - IRB 920 83
3HAC075721-001 Revision: C
© Copyright 2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.2 Customer connections
Continued