ABB OmniCore E10 - Page 125

Note/IllustrationAction
xx2100001331
Release the connector from the bracket.2
xx2100001332
Pull the fan and lift it out.3
Refitting the small fan
Refitting the small fan
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 28.
1
Continues on next page
Product manual - OmniCore E10 125
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.2.1 Replacing the small fans
Continued